home ┊ about us ┊ news ┊ products ┊ feedback ┊ service ┊ contact us ┊ 中文版     
 
 
=== Category ===
  > Steel wire tensity reflectosco
  > Sealing property instrumentati
  > Mechanical pulling force table
  > Other instrumentations
=== Contact ===
Factory Add:4F,35 District,
         Baoan,ShenZhen
Sales Add:4F,B63 ,HaiCheng,
         Baoan,ShenZhen
Tel:0755-29218806
Fax:0755-27901036
Mobile:13714557020
E-mail:xxinfa@163.com
Contact:Mr.xiang
>>
 Service
Currently:Home >> Service   
 

                                      SL-□ □ Model Download
1, S - Cable and practical in a flexible rules of the tensile ropes
L - of the tension by stretching a rope
□ □ - Range: The product of three existing series of 10,20,30 T
Precision instruments: the equipment required when measured in accordance with the specifications of calibration, cable choice, in the measurement accuracy within 5 percent.
Solemnly declare: This product has won state patents, patent No.: ZL03273775.0 imitation will study
2, SL-□ □ Tension-type measuring instrument cable principle (a)

 
 
The use of the principle of decomposition when the system balance:

T = 2F × cos (a / 2)
Of which: T for the thrust; F Rally for the cable; a claim for both sides of the cable angle
As a fixed the same, so T and F is directly proportional to the role of the T of the sensor, the output of the sensor, the circuit operator, the amendment, to enlarge on the screen shows the value is measured by the cable tension.
3, BSL-□ □ Tension-type measuring instrument cable structure (Figure 2)

 

 
4, operation panel (see Figure 3)
 
 
Button from left to right followed by "ON / OFF ","+","-"," ENTER / ZERO"; the top five LCD display for digital cable Rally, in units of Kg

5, calibration:
a) after the boot back to zero at the same time under the "ON / OFF" and "ENTER / ZERO" button to show "SN-□ -" after the release (□ on behalf of cable, 01 to 9).
b) by pressing the "+" or "-" The 0 to 9 in the necessary cable, and then click "ENTER / ZERO" button to confirm.
c) by pressing the "+" or "-" selected by the corresponding cable, the corresponding range as 2000,5000,10000,20000 Kg then click "ENTER / ZERO" button to confirm (10 T-optional measuring range 2000,5000,10000 3; 20 T-Force range 5000,10000,20000 optional three, 30 T-Force range 10000,20000,30000 three optional).
d) pre-selected range of 20 percent Rally, the round steel shafts Suoka Xuanjin hand wheel to the cables to the top limit, according to "ENTER / ZERO" button to confirm, instrument calibration to automatically display the next Rally (40 %); Release Xuanjin hand wheel, then Preferences selected range of 40 percent Rally, the round steel shafts Suoka Xuanjin hand wheel to the cables to the top limit, according to "ENTER / ZERO" button to confirm, automatic meter To show the demarcation of the next Rally (60%); release Xuanjin hand wheel, then Preferences selected range of 60 percent Rally, the round steel shafts Suoka Xuanjin hand wheel to the cables to the top limit, according to " ENTER / ZERO "button to confirm, instrument calibration to automatically display the next Rally (80%); release Xuanjin hand wheel, then Preferences selected range of 80 percent Rally, the round steel shafts Suoka Xuanjin hand wheel to Cables to the top limit, according to "ENTER / ZERO" button to confirm, instrument calibration to automatically display the next Rally (100%); release Xuanjin hand wheel, then Preferences selected range of 100 percent rally, cables Card slot into the round of Xuanjin hand wheel to cables to the top limit, according to "ENTER / ZERO" button to confirm that this demarcation of the cable, (automatic refresh this claim at this time of the last calibration data), if the By "ENTER / ZERO" button to automatically switch to the beginning of this demarcation, measuring 0.1 to 0.1 against the state.
e) the cable on the issue of the demarcation completed
f) to return to the original claim, after the other optional cable, repeat b, c, d steps calibration.
g) according to "ON / OFF" withdraw from the calibration, switch off the power.
h) Calibration operation a detailed record of the claim, corresponding to the cables range and the specifications and calibration records, credited to the claim form.
6, measuring operation;
a) on "ON / OFF" not only entered the previous measurement of the cable, measuring, and can be directly measured the same cable, cables.
b) After the boot back to zero at the same time under the "+","-" to "-" After the release, selected by pressing the button corresponding "+","-" signs of the cable, according to "ENTER / ZERO" button to confirm .
c) Suoka into the round steel shafts Xuanjin hand wheel cables to the top to limit tension cables that show.
d) There is no operation, 30 minutes automatic shutdown
e) test completed by switching off "ON / OFF" button to switch off their power.
f) different range of cable-calibration of the cable, the following table:

SL-10 SL-20 SL-30
Calibration of cable diameter range (T), cable diameter calibration range (T), cable diameter calibration range (T)
1 φ10 5 1 φ ≤ 16 10 1 φ ≤ 22 15
2 φ12 5 2 φ18 10 2 φ24 15
3 φ14 10 3 φ20 15 3 φ26 20
4 φ16 10 4 φ22 15 4 φ28 20
5 φ18 10 5 φ24 20 5 φ30 30
6 φ20 10 6 φ26 20 6 φ32 30
7 φ22 10 7 φ28 20 7 φ34 30
         



7, Attention:
a) Do not improper disposal of general Luanfang, equipment after use Add to me in
b) battery in the folder flexibility, low-voltage show that there "- LO-" when can pull out the replacement of 9 V high-energy batteries. Another showed a low voltage "ERR-1" automatic shutdown.
c) in the relative humidity below 90 percent, -20 ~ +60 ℃ temperature range of stored, equipment, water and other liquids ban
d) in the 0 ~ 50 ℃ temperature range of use
e) the use of equipment are banned
8. Warranty: Products manufactured within a year free of damage Fei Renwei year warranty, product life-long maintenance
 
 
 
copyright:Shenzhen jinxiangyuan Technology Co.,Ltd.